Details of Logo 02-C-000535

TOP > 02-C-000535

TW-2-C-20101015-000182

Management Application Form Extended Test Categories

Logo ID	02-C-000535
Approved Date	2010/11/10
Application ID	TW-2-C-20101015-000182
Applied Date	2010/10/15
Usage Agreement	Agreed
OEM Licensor's Logo ID	-
Note	-

Management Application Form Extended Test Categories

Target Information
	Test Category	Core Protocols
	Vendor Name	D-Link Corporation/D-Link Systems, Inc.
	Country	TW
	Product Name	DIR-815
	Product Version	V1.00
	Product Classification	Router
	Product Description	Wireless N Dual Band Router
	Vendor's Note	Note 1: ##About ROUTER.NetBSD ## When NetBSD, acting as an IPv6 router, received ICMPv6 Echo Requests with 1500 bytes, it will response and fragment ICMPv6 Echo Replies within MTU 1280 bytes. Even if NetBSD is configured by using this command "ifconfig rtk0 mtu 1500". Note 2: ##1.6.B.D-Link.NetBSD.Network1.dump## ##1.6.B.D-Link.NetBSD.Network2.dump## When we process this test case in the interoperability test, NetBSD (TAR-Router2) can't receive the ICMPv6 Too Big message in procedure 12 of Test IP6Interop.1.6.B. We exchange the direction of ping in 1.6.B.NetBSD. NetBSD (TAR-Router2) ping REF-Host1, then TAR-Router1(our device) will send ICMPv6 Too Big packet. We use the command "ping6 -mm -s 1452 -c 5" to force NetBSD sending ICMPv6 Echo Requests without fragmenting. Note 3: ##1.6.E.D-Link.NetBSD.Network1.dump## ##1.6.E.D-Link.NetBSD.Network2.dump## ##1.6.E.D-Link.NetBSD.Network3.dump## When TAR-Router2 receives ICMPv6 Echo Requsts from REF-Router1 on the Network3, it will fragment the ICMPv6 Echo Reply within MTU 1280 bytes. REF-Router4 will not transmit ICMPv6 Too Big message. We use the command "ping6 -mm -s 1452 -c 5" to force NetBSD sending ICMPv6 Echo Request without fragmenting. Then the REF-Router4 will send ICMPv6 Too Big message. Note 4: FreeBSD, acts as a router or a host, will lost the first fragmented packet, when it use NS/NA to discover a neighbor. These situations occur in the following test items. ## 1.6.A.Linux.D-Link.Network2.dump ## ## 1.6.A.USAGI.D-Link.Network2.dump ## We use FreeBSD as REF-Host2. ## 1.6.B.D-Link.FreeBSD.Network2.dump ## ## 1.6.B.D-Link.NetBSD.Network2.dump ## We use FreeBSD as REF-Host1. ## 1.6.D.Linux.D-Link.Network2.dump ## ## 1.6.D.USAGI.D-Link.Network2.dump ## We use FreeBSD as REF-Router2. ## 1.6.E.D-Link.FreeBSD.Network2.dump ## ## 1.6.E.D-Link.NetBSD.Network2.dump ## We use FreeBSD as REF-Router3.
Test Information	Test Specification	4.0.6
	Interoperability Test Scneario	4.0.4
	Information for Series of Product

Management Application Form Extended Test Categories

Interoperable Devices	Router
	1	Vendor Name	The FreeBSD Project
		Device Name	FreeBSD
		Version	5.4-RELEASE
	2	Vendor Name	The NetBSD Project
		Device Name	NetBSD
		Version	4.0.1-RELEASE
	Host
	1	Vendor Name	Kernel.Org
		Device Name	Mainline Linux Kernel
		Version	2.6.15.6
	2	Vendor Name	USAGI Project
		Device Name	USAGI
		Version	usagi-linux26-s20060327
Target supporting Advanced Functions:	o Transmitting Echo Requests(Passive Node) - Configuring Multicast Packet Size o Multicast Routing(Router Only) - RFC 4191 Type C Host(Host Only) - Duplicate Overlapping Fragments - Beyond Scope of Source Address(Router Only) - Tracking Connections for ICMPv6 - Router Advertisement DNS (Host Only)